DVD/VCD/S-VCD
Silvercrest KH 6508/KH 6509
11. Playing DVDs, VCDs or S-VCDs
Proceed in the following manner to play a DVD/VCD/S-VCD
on the DVD Player …
1 Switch on the television to which the DVD Player is con-
nected.
2 Ensure that the DVD Player has been switched on and is
ready to operate.
If the television, DVD player and possibly other connected de-
vices (e.g. an audio component) are operational and switched
on and the DVD player is properly connected to the television,
you can now see the SilverCrest Opening logo on the television:
“NoDisc” is faded in on the television screen and on the
display on the front side of the DVD Player if no disc has
been loaded in the disc drawer of the DVD Player.
3 Open the disc drawer on the front of the DVD Player by
pressing once the “Open/Close” button on the front
of the DVD Player or on the remote control. “Open” then
appears on the display on the front of the DVD Player
and on the television screen.
4 Load a DVD/VCD/S-VCD with label side facing upwards
in the disc drawer.
Please note:
DVDs, VCDs and S-VCDs that are to be played on the
DVD Player may have a country code printed on the
DVD/VCDs/S-VCDs sleeve. The DVD Player can only
play DVDs/VCDs/S-VCDs with the Country Code 2.
If no country code is printed on the sleeve of a DVD/
VCD/S-VCD …
• but rather the symbol , then the DVD/VCD/SVCD
can be played on the DVD Player, or
• the given DVD/VCD/S-VCD cannot be played on
the DVD Player. To check, simply by trying to play
the DVD.
5 Press the “Open/Close” button on the front of the DVD
Player or on the remote control once again to close the
disc drawer. “Close” will be indicated on the display on
the front of the DVD Player and on the television screen
while the disc drawer is closing.
6 The contents of the DVD/VCD/S-VCD are now loaded;
this can take several seconds. In the meantime “Load”
will be fl ashing on the display on the front of the DVD
Player, and “Load” is displayed on the television screen.
7 The loaded DVD/VCD/S-VCD starts automatically.
Depending upon the loaded DVD/VCD/S-VCD, the fi lm
on the DVD may not be immediately played because an
option may fi rst appear on the television screen.
In such an event …
Select with the control buttons
on the re-
mote control, the menu item with which fi lm playing
is started.
8 To start playback of the fi lm …
• Press the “OK” button on the remote control once
or
• Press the “Play“ button on the front of the DVD Player
or on the remote control once.
“Play“ is briefl y displayed on the television screen, and the dis-
play on the front of the DVD Player indicates the following:
1 2 3 4 5
1
The DVD video symbol when a DVD has been load-
ed or, when a VCD/S-VCD is loaded: “VCD“ or “S-VCD”
2
The symbols and for the play mode
3
The number of the currently playing title
