Filter
Top Products
- 9 -
Connection with the 12 V vehicle adapter
1. Plug the device plug of the 12V vehicle adapter
into the socket on the side of the device.
2. Plug the 12V vehicle adapter into a suitable
socket, for example, the cigarette lighter con-
nection in the vehicle.
Note:
- The supplied 12V vehicle adapter may only
be used on 12V supply systems.
- The DVD player may only be operated with
the supplied 12V vehicle adapter
- Do not use the supplied 12V vehicle adapter
on other devices.
- After use, remove the 12V vehicle adapter
from the DVD player and from the vehicles
power socket.
6.2 Charging the battery
The DVD player is equipped with a rechargeable
battery pack, which will operate the device if no
power source is available.
For this the rechargeable battery must be charged
for approx. 3.5 hours before the first use and for
each full charge thereafter. A fully charged battery
allows for a playback time of approx. 2 1/2 hours
(depending on the type of playback, for example,
the volume).
1. Plug the device plug of the power supply unit
or the 12 V vehicle adapter into the socket
DC IN on the side of the device.
2. Plug the power plug of the power supply unit
into the power socket or the 12V vehicle adapter
into the Vehicles cigarette lighter socket.
• While the battery is charging the charging
condition light on the side of the battery is
illuminated red.
• When the battery is fully charged the charging
condition light on the side of the battery turns
green.
Removing/installing the rechargeable battery
pack
1. Slide the unlocking tab on the bottom of the
device in the direction of the arrow and hold
in this position.
2. Pull the rechargeable battery pack, as illustrated
above, backwards.
IB_KH6504_V865_LB6_V2 24.01.2008 18:26 Uhr Seite 9