Filter
Top Products
6 freePORT PAS 400 Version 060328
1 Installation & Set-up
1.1 Safety Precautions
Note!
Please read and follow all of the safety precautions in this manual! It is absolutely essential
that you read these safety instructions carefully before connecting and using this product.
Your safety depends on it. Furthermore, failure to follow these instructions voids the
warranty.
To ensure safe operation for many years, keep these instructions in a safe place for future
reference. K+H has manufactured this product in accordance with IEC 92 (SEC) 39 standards,
then tested and delivered it in a safe operating condition. To maintain it in this condition, you
must:
y observe all safety instructions,
y use the product only as described herein
y have any maintenance, repairs, or modifications performed only by K+H or its authorized
agents
y ensure that the room in which the product is used is wired in accordance with local
electrical codes
If the loudspeaker will be installed in an area where people could go underneath it, then it
should be secured with an additional safety cable, which can be attached to the carrying
handles!
1.2 Deliverables
y 1 freePORT PAS 400 active PA loudspeaker system
y 1 power supply cable
y 1 Installation & Operation Manual
1.3 Operating Conditions
The temperature limits for the freePORT PAS 400 active PA loudspeaker system are as
follows:
Operating Temperature:
+14 to +104 °F (-10 to +40 °C)
Storage or Transportation Temperature:
+5 to +104 °F (-15 to +40 °C)
If the temperature of the loudspeaker falls below 5 °F (-15 °C) at any time, the rechargeable
battery may be permanently damaged.
The freePORT PAS 400 will operate in any position and under a variety of conditions. It is,
however, not watertight and should only be installed or operated in dry conditions. Areas
with excessive moisture, considerable dust or aggressive chemicals should also be avoided.
The freePORT PAS 400 is not for outdoor installations. Temporary outdoor usage is possible,
but only within the temperature limits and in no situations where water can directly come in
contact with the unit. For operation under rainy conditions, the LRH/S Rain Hood accessory
must be used.
The coated loudspeaker cones can handle temporary exposure to fog but in no case can they
tolerate any dew or condensation.