Filter
Top Products
English
|
69
Before Use
Setup Menu
Crossover Network Setup
You can manually set a crossover frequency of
speakers.
X'Over
(Page 64 p)
Normal
Phase
Return
80 Hz
Frequency
12dB/Oct
Slope
Normal
Phase
X'Over
100Hz
0dB
1kHz
LPF
Subwoofer
2
3
4
1 1
2
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type on the Speaker Setup
screen, the crossover frequency setup is cleared.
• During crossover setup, the speaker type is set to "User"
on the Speaker Set Up screen.