Filter
Top Products
100
|
English
Sound Effects Menu
Zone Control
You can set the front and rear audio source.
Displaying the Zone Control screen
Zone Control
Zone Control screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 62)
4 Calls the Sound Effects Menu.
5 Turns the Zone Function (that sets different source
sounds for front and rear speakers) On or Off.
When turned On,
Front
,
Rear
and Rear volume are
shown.
6 Adjusts the volume of the rear channel.
(This button appears when the Zone function is
On.)
7 Sets the front and rear audio source separately.
(This button appears when the Zone function is
On.)
• When the rear speaker sound is switched, the audio source
that is output at the AV OUTPUT terminal is also switched to
the same source.
However, if you have set the "Area" to "Reverse", the audio
source that is output at the AV OUTPUT terminal is switched
depending on the front sound source.
8 Switches the front and rear audio sources.
(This button appears when the Zone function is
On.)
Use "Reverse" to change over the front and rear
audio sources.
• There are following limitations when zone function is set
to
"On".
- There is no output from the subwoofer or center.
- <Audio Setup> (page 64), <Equalizer> (page 92),
<Surround Control> (page94), <SRS WOW> (page 96)
<Position> (page98) are not available.
TV
Reverse
DVD
Dual Zone
Rear Vol. 15
Rear
Front
Area
Zone
Zone Control
Zone Control
Zone Control
MENU
1
2
4
1
1
1
3
6
5
5
7
7
6
8