Filter
Top Products
42
Knowledge
DV-505/DVF-R4050 (EN)
÷A viewing restriction (RATING) has been set for
the disc.
÷You have forgotten the viewing restriction (RAT-
ING) password.
÷The DVD disc being played does not contain the
recording of the selected voice or subtitle lan-
guage.
÷The function for displaying message on the TV
screen (On-Screen Messages) is set to off.
÷The menu language function (MENU) is not set.
÷DVD disc cannot be played when the sequential
mode of the player is set to “SEQ.2”.
÷Menu playback is not available when P.B.C. is
Off or the sequential play mode of the player is
set to “SEQ.2”.
÷The operation is inhibited. Please try an-
other operation.
The inhibition icon is displayed
and remote control is not pos-
sible.
÷Playback is restricted intentionally by the soft-
ware producer.
In case of difficulty
DVD player unit
÷Check the viewing restriction level (RATING)
setting.
÷Set the initial setup to the factory setup with
the following procedure.
1 In POWER ON condition, keep the DISC 3 key and the
44
44
4
(Skip) key key pressed at the same time.
2 When both keys are pressed, the region code of the unit, the
software version, etc. will be displayed on the display. (When
nothing is done, the display of this information continues.)
3 Press the ON/OFF key to go to Power OFF.
4 When Power ON is performed with the ON/OFF key, the
settings become the default factory settings.
÷Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷Set On-Screen Messages to on.
÷Set the disc menu language function (MENU)
as required.
÷Switch it to “SEQ.1”.
÷Switch it to P.B.C. On or “SEQ.1”.
Playback will not start even after a title is
selected.
The viewing restriction level (RATING) can-
not be changed.
The voice or subtitle language selected in
the initial setting is not played.
No message appears on the TV screen after
a key is pressed.
Menu screen messages are not shown in the
desired language.
DVD disc cannot be played.
P.B.C.-compatible VCD cannot be played
with menu playback.
RemedyCause
Symptom
Remote control unit
Symptom Cause Remedy
Remote control operation is not possible. ÷ Batteries are exhausted.
÷ The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.
÷Replace with new batteries.
÷Operate the unit inside the remote control-
lable range.
Symptom Cause Remedy
Inhibition icon
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
and 4,819,098, Licensed for limited viewing uses only.
This product is compatible with the MacroVision type copy
protection. Some discs contain the recording of copy inhibit
signals, and the video may be disturbed when the video of
such discs is recorded onto a VCR and played back.
This product incorporates copyright protection technology that is pro-
tected by method claims of certain U.S. patents and other intellec-
tual property right owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be author-
ized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
It is prohibited by laws to duplicate, broadcast, perform in
public or rent a disc without the permission of the copyright
owners.
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. © 1992-1997 Dolby Laborato-
ries. All rights reserved.
“DTS” and “DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc.