Filter
Top Products
25
Operations
DV-505/DVF-R4050 (EN)
DVD
CD
VCD
Program play
Program Edit
1 During stop mode, press the P.MODE
key on the remote.
2 Select specific disc/title/chapter or
track by Press Cursor up/down (5/
∞) keys or numeric keys (0-9).
3 Press the ENTER key.
Program edit display appears.
(An example of DVD program edit menu)
4 Select Add icon on the screen to
register selected value onto
Playlist, then press the ENTER key.
You can listen to the desired tracks or chapters of the current disc in any desired order.
5 You can select maximum 32 val-
ues by repeating step 2
-
4.
6 Press the PLAY key to start play-
back.
PROGRAM EDIT
1
All1
Add
Delete
CTD
Play
Done
Disc
(2)
ChapterTitle
(12)
Playlist
2
: Selected icon
: An icon which can be selected
: An icon which presently can not be selected
PROGRAM EDIT
2
All
Add
Delete
CTD
Play
Done
Disc
(2)
ChapterTitle
(12)
Playlist
2 All
2
2
÷ When you don’t add values onto “Playlist” and
return to play mode, select Done icon and press
ENTER key on the remote.
÷ While a disc is playing, press P.MODE key on the
remote to start Program play
÷ To return to standard play, press the P.MODE key
again.
÷ MP3 discs can not be programmed with this pro-
gram mode. (MP3 program play ·)
÷ When switching to Program mode with SEQ. Mode
ON, SEQ. Mode automatically becomes OFF.
With later return from Program mode to normal
playback, SEQ. Mode returns to ON.
P.MODE
MULTI CONTROL
ENTER
MULTI CONTROL
ENTER
Add icon --- Add value onto “Playlist”
Delete icon --- Delete value from “Playlist”
Insert icon --- Insert value in “Playlist”
Play icon --- Play program play
Done icon --- Return to stop or resume mode
Note
Note
Registering and playing the program
Insert all of the discs to be used in programming in the tray, close it and press the DISC 1 to 5 keys so that the player
reads the disc information by playing each disc until display “READING” disappears. (If the tray is opened after this,
the above procedure should be repeated so that the player reads all disc information again.)