Filter
Top Products
E - 11
CONNECTING OTHER EQUIPMENT
A. Connecting the unit to a TV
• If your TV has Audio/Video inputs, you can connect the unit to your TV using the included Audio/Video cable.
(continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
(Yellow)
(Red)
(White)
Right side of unit
To AV OUT
Jacks
AUDIO/VIDEO
CABLE
AUDIO/VIDEO
CABLE
(included)
TV
Watching a DVD on your TV
1.Turn on the unit, slide the AV IN / DVD switch to select "DVD".
2.Turn on the TV and follow the instructions provided with it to play the DVD.
Notes: Please use the correct Audio/Video cable.
B. Connecting to an amplifier or stereo receiver
This unit can play Dolby Digital, but only in two channels.
Analog connection
Amplifier or stereo receiver
Right side of unit
(No need to connect the Yellow video plug)
(Red)
(White)
AUDIO/VIDEO
CABLE
AUDIO/VIDEO
CABLE
(included)
VIDEO
IN
AUDIO
IN
AUDIO
OUT
VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
IN
Notes:
• You may experience interference if the radio tuner function is selected while the television is working.
• Make sure to use the correct Audio/Video cable, connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
Listening to another audio equipment
1.Turn on the Unit.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN function.
P9-12.PMD 7/23/2005, 11:51 AM11