Kawasaki PVS1112 Portable DVD Player User Manual


 
GB - 21
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE (AND REMEDY)
Severe hum or noise is
heard.
The disc does not play.
The region number of the disc does not match the region number of the unit.
DVD mode is not selected, select DVD on AV IN/DVD switch.
Clean the disc.
The disc is scratched.
The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
Clean the disc.
There is no disc inside ("No Disc" appears on the screen).
Insert the disc correctly with the playback side facing down on the disc tray.
Clean the disc.
A non-Valid disc has been inserted. The unit and disc region number are incompatible.
Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
No picture
The picture is not clear
Make sure that you've select DVD mode.
The system is in pause mode or in Slow-motion Play mode. Press the
PLAY button
to return to normal play mode.
Fast forward or fast reverse is performed. Press the
PLAY button to return to normal
play mode.
Make sure that AUDIO/VIDEO output and AV IN input connections are correct.
The DTS DVD disc cannot be decoded for speaker output.
This unit is too hot, shut off the unit for 30 minutes to cool down.
Check that the AC adaptor and AC power cord is connected.
Turn on the unit.
Remove any obstacles between the remote and the unit.
Use the remote near the unit.
Point the remote at the remote sensor on the unit.
Replace the battery in the remote.
No power.
The remote does not
function.
DVD
No sound or only a very
low-level sound is
heard.