Filter
Top Products
3
EnglishEspañol
Nederlands
XL-PM400S / LVT1179-005A [E]
AC adaptor
AC power outlet
Preventing Accidental Operation
(Hold mode)
This function causes the unit to ignore, accidental but-
ton presses.
Hold mode prevents the following:
• Powering on the unit accidentally (which can cause
the batteries to go dead).
• Play being cut off unexpectedly.
To use the Hold mode
OFF
ON
HOLD
• To prevent the unit from powering on accidentally, set
the HOLD switch to the ON position while the unit is
turned off.
• To prevent the unit from unexpected operation during
play, set the HOLD switch to the ON position after you
starts playing the disc.
• When the unit is in Hold mode, “HOLd” and “
” lights
as follows.
Power on : “
” stays lit.
Power off : “HOLd” and “
” lights up for a few sec-
onds when 6 is pressed.
Note:
If the HOLD switch is set to the ON position, you cannot turn on
the unit.
Using the AC adaptor (not supplied)
Notes:
• Even if the unit is turned off, small power is consumed as long
as the AC adaptor is connected to the AC power outlet.
• When you want to purchase the AC adaptor, see page 14.