Filter
Top Products
18
Setting the Clock and Timer
Setting the Clock
Set the built-in clock before using the Timer.
• You can set the clock when the unit is turned on or on standby
• To exit from the clock setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
• If there is a power failure, the clock loses the setting and is reset to “AM12:00.” You need to set
the clock again.
1
Activate the clock setting mode.
“AdjCLOCK” appears then the hour digit of the time indication flashes on
the display.
• If you have already adjusted the clock before, press the button 2 times to
activate the clock setting mode.
2
1 Adjust the hour while the hour digits of the time indication flashes on the
display.
2 Adjust the minute while the minute digits of the time indication flash on the
display.
3 Select the day of the week.
“CLOCK OK” appears and the built-in clock starts working.
Clock settingTIMER 1/TIMER 2/TIMER 3
*
Canceled
*
See page 19.
MON DAY
(Monday)
TUE DAY
(Tuesday)
WED DAY
(Wednesday)
THU DAY
(Thursday)
FRI DAY
(Friday)
SAT DAY
(Saturday)
Back to the beginning
SUN DAY
(Sunday)
EN_NX-PN7[C].BOOK Page 18 Sunday, April 27, 2008 1:54 PM