Filter
Top Products
– 29 –
English
6
Press START (ENTER).
Recording starts, and the following information appears
in the main display.
When recording is over, both MD decks stop.
• When you record on a blank MD, the disc title of the
source MD is automatically recorded (up to 64
characters).
• A blank portion will be automatically created before
each newly recorded track.
To stop recording, press 7 either for MD deck A or B.
To remove the MDs, press 0 for MD deck A and for MD
deck B.
To confirm the recording contents
Press DISPLAY/CHARA while recording.
The following information will appear on the display for a
while.
• Track No. of the source MD
• Track No. of the current recording on the other MD
CD to MD Synchronized Recording
You can play back a CD and record it onto an MD in MD
deck B.
• Before you start recording in the following steps, you
can —
– cancel the setting, press REC MODE.
– go back to the previous steps, press CANCEL.
On the unit ONLY:
1
Load a CD.
• You can make a program if you want (see page 17).
2
Insert a blank or recordable MD into the MD B
loading slot.
3
Press REC MODE.
“MD 3 MD REC?” appears in the main display.
The MD 3 MD lamp also lights.
• To cancel the setting, press REC MODE again in the
following steps 4 and 6. Each time you press the
button, recording mode turns on and off alternately.
4
Rotate the left jog dial until “CD 3 MD REC?”
appears in the main display.
5
Press SET.
6
Rotate the left jog dial to select the source CD and
the recordable MD.
7
Press START (ENTER).
Recording starts, and the following information appears
in the main display.
When recording is over, both MD deck B and CD
player stop.
To stop recording, press 7 either for CD player or MD
deck B.
To remove the CD, press 0 for the corresponding CD
number.
• If you eject the CD currently playing, recording stops.
To remove the MD, press 0 for MD deck B.
• If you press the button while recording, the loading slot
cover does not open.
To confirm the recording contents
Press DISPLAY/CHARA while recording.
The following information will appear on the display for a
while.
• Track No. of the source CD
• Track No. of the current recording on the MD
Ex. CD 2 and MD 3 are selected
Remaining time of
the source track
Remaining time
on the MD
Remaining time of
the source track
Remaining time
on the MD
EN19-33.MX-WMD90[J] 99.2.2, 2:57 PM29