Filter
Top Products
– 9 –
English
ANTENNA
NOW, you can plug in the unit and other connected
equipment FINALLY!
To output
To optical digital output
Protective plug
To connect audio equipment with an optical digital
output terminal
By using both an optical digital cord (not supplied) and an
audio cord (not supplied), connect:
• Between the optical digital output terminal on the other
equipment and the AUX DIGITAL IN OPTICAL
terminal.
• Between the audio output jacks on the other equipment
and the AUX jacks.
Before connecting the other equipment,
remove the protective plug from the terminal.
Audio equipment with an
optical digital output
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
To stop the display demonstration, press any button on
the unit or the remote control.
To start the display demonstration manually
Press DEMO.
• Even while the unit is turned off, you can see the display
demonstration.
To stop the demonstration, press any button.
ANTENNA
To a wall outlet
EN01-09.MX-WMD90[J] 99.2.2, 2:56 PM9