52
Parental control
1
Press SET UP MENU in the stop mode.
Press
or to select “Parental”.
Then press ENTER.
2
Press or to select “Parental 8”,
then press ENTER until the level you
desire appears (e.g.: 1).
3
Press once to select “Password ”.
4
Press ENTER.
1234
change to .
Parental control setting
Turn ON the TV and set to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)
Preparation:
•
•
• If you input a wrong number, press
CANCEL.
• Be sure to remember this number!
Some discs are specified not suitable
for children. Such discs can be
prevented from play back with the
unit.
Level Off : The parental control setting does not function.
Level 1 : DVD software for adults cannot be played back.
Level 8 : All DVD software can be played back.
Select from level 1 to level 8.
On a scale of 1-8, “1” is the most restrictive.
Then press Number keys to input a 4-
digit
password (e.g.: 1234).
Password
Parental
1
/Enter/Setup/Return
Language Picture Parental OtherSound
5
To make SETUP screen disappear, press SET UP MENU.
1
Select “Password ” (step 1)
and press Number keys to input your
4-digit password.
Then press ENTER.
To unlock the Parental Control Setting
2
If the input password was right,
will appear.
You can move to “Parental 1”(e.g.) to
input the desired level or to cancel
parental control.
Cancel the password so as to set the Parental level freely again,
NOTES:
If each setup (page 46~47, 52~59) has
been completed, the unit can always
be worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the
memory if you turn the power off.
Depending on the discs, the unit can-
not limit playback.
Some discs may not be encoded with
specific rating level information though
its disc jacket says “adult”. For those
discs, the age restriction will not work.
Do not forget the password. If you forget
the password, contact customer service.
•
•
•
•
2C50101BE(52-57) 13/5/03, 3:33 PM52