Filter
Top Products
22
2
To ADD/DELETE channels/Noise elimination
To ADD/DELETE channels
Repeat the step 1 on page 21.
Then press or to select the
“ADD/DELETE” option and press
ENTER.
Press Number keys or /
to select a channel number
you want to add or delete.
1
To Add or Delete desired channels
1
To add channels
Press ENTER until “ADD”
appears on the screen to set
to add the unmemorized
channel.
To delete channels
Press ENTER until “DELETE” appears on the screen to
set to delete the channel from memory. The channel
number will blink.
Repeat to to add or delete other channel.
1
2
3
2
3
Press SET UP MENU until the menu screen is cleared.
Repeat the steps 1~2 on page 20 and press
or to select
“NO NOISE BACKGROUND”.
1
2
Press ENTER to select the “ON”
position.
Noise elimination
You can add the channels you want
or delete the channels you do not
want manually.
When you don't want to receive a weak signal broadcast, the
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND "ON". When the unit is shipped from the
factory, the NO NOISE BACKGROUND is set to the "ON".
3
Press SET UP MENU until the menu screen is cleared.
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/
–
/ENTER/MENU
2C50101BE(18-23) 13/5/03, 3:33 PM22