Filter
Top Products
16 EN
OPEN & CLOSE (Basic Operation Procedure)
The Video Capture software can be started up in the same way as any other program running
under Windows. The procedure differs slightly depending on whether you’re using Windowsா
3.1 or Windowsா 95.
Preparation
• Turn on your computer.
• Turn on the video source units (such as camcorders and VCRs).
• If you want to capture a still picture from a recorded tape, load the tape into the video unit.
• If you want to capture an image from the data stored in the JLIP Player Software, be sure to
load the disk on which the image is stored.
Close any programs that are running. You cannot run other programs simultaneously with
the Video Capture software.
With Windowsா 95, click the [START] button on the taskbar, and the Program menu
appears on the screen. Move the mouse pointer over the program entry you want to run
and click to start the program.
Now let’s start the program.
If you’re using Windowsா 3.1, open the JLIP Video Capture group in the "Program Manager" and
double-click the JLIP Video Capture icon.
If you’re using Windowsா 95, select JLIP Video Capture from the "Start menu" and click to start.
With Windowsா 3.1, open the group of application icons in the Program Manager and
double-click the application icon you want to launch.