Jensen SMPS-200 Portable Speaker User Manual


 
6
USING USB POWER
1.) Plug the small end of the USB cable (included) into the mini USB connector on
the back of the unit.
2.) Plug the large end of the USB cable into your computer USB port if it supplies
5V DC, 1000mA or into a USB power adapter (not included) with an output
port with rating DC 5V 1000mA. Insert the AC adapter into a wall outlet.
NOTE: If you use a USB power adaptor to power up this unit, then you can only
play music via its AUX IN jack.
NOTE: These speakers are not magnetically shielded and may cause color
distortion on the screen of some TVs or video monitors. To avoid this, you may
need to move the speakers further away from the TV or monitor if unnatural color
shifts or image distortion occurs.
PLAY MUSIC BY AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and iPod/iPhones (except iPod
shuffle 3
rd
gen) and allow you to listen to your external source through the
speakers of this unit.
1.) Use an audio cable (included) with one 3.5 mm stereo plug on each end of the
cable.
2.) Plug one end into the AUX-IN jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3.) Press the POWER
button to turn on the unit. The blue LED under
VOLUME UP/DOWN and POWER buttons lighting.
4.) Turn on your external audio device.
5.) Press the VOLUME UP/DOWN button to adjust the desired volume level.
Operate all other functions on the auxiliary device as usual.
NOTE:
(1) If you’re connected to the Line Out Jack of your external device then you only
need to adjust the volume control on the SMPS-200. If you’re connected to the
Headphone Jack of your external device, then you may need to adjust both the
volume control of your external device and the volume control on the
SMPS-200 to find the most desirable volume setting.
(2) Press the POWER
button to turning off the system when you finish
listening. Don't forget to switch off the power of your external device as well.