Filter
Top Products
9
iP od DOC K ING
This model includes adaptors for adopting different iPod models. If the docking bay will not be used for
an
1. S elect a suitable adaptor for your iPod and insert it into the docking bay
2.
For docking an iPod nano, slide the dock connector to the left and also
see note on
of this instruction manual.
For other iPod models, slide the dock connector to the right (
and
3. Insert your iPod
extended period of time, it is recommended to use the "Dock Cover" insert to help protect the docking
connector.
.
Your iPod can now be docked by placing the connector on the bottom of
the iPod directly over the dock connector located in the docking bay.
Seat the iPod on the dock connector to assure a proper connection.
center position)
insert the iPod adaptor for the type of iPod you are using.
with the connector facing down and positioned directly over the dock connector located
in the docking bay. Seat the iPod on the dock connector to assure a proper connection.
" DOCKING 1st AND 2nd GE NER ATION iPod nanos "
section
Note: When docking your iPod, please be careful to avoid damaging the 30-pin connectors located on
the iPod and in the docking bay.
4. S lide the Audio Input Selector switch on the back of the unit to iPod position.
5. Press the ON/STANDBY button to turn On the main unit.
6. Press the PLAY / PAUSE button from the R emote Control to pause or resume iPod playback.
7. Adjust the sound level by pressing the VOLUME + / - buttons.
Note : The Volume level cannot be adjusted using the volume control on your iPod when
docked.
8. The iPod charges even during playback.
9. To remove the iPod from the Docking , press and hold the PLAY/PAUS E button for three seconds
iPod playback control from remote control:
- Press the PLAY/PAUSE button to pause or resume the iPod playback;
- Press the iPod Skip/Search Forward or Backward button to skip to the next or previous song;
- Press and hold the iPod S kip/Search Forward or Backward button for fast-forwarding or
fast-rewinding during playback.
bay
to switch off the iPod. You can now gently remove it from the docking bay.
8
SYSTEM PLACEMENT
We recommend that you place the JiSS-330 properly on your desk, counter or table.
The unit produces exceptional sound from any listening position in the room.
However, the best quality sound and surround sound effects will be heard with the unit
placed directly in front of you and facing you.
1-6ft
Preferred
Not Preferred
Preferred
Not Preferred
PC
USER
PC
USER
PC
USER
PC
USER
1-6ft
Refer to your iPod operation manual to adjust the "EQ" setting on your iPod. This will enhance the
sound and also help adjust the sound to the room you are using it in.
Insert the iPod
adaptor into the
docking bay
Dock your iPod
with the connector
in the docking bay