Filter
Top Products
11
control to control the iPod/iPhone menu, scroll menu up/down and enter selection.
Press the REPEAT button on the remote to repeat one or repeat all song / file playback.
Press the RANDOM button on the remote to shuffle playback.
Note:
1. The iPod/iPhone Menu Control function will work with most iPod touch/iPhone models in iPod
mode. Please make sure your iPod/iPhone is in iPod mode before dock. The function will
NOT work if the iPod/iPhone is in MAIN or LOCKED screen.
2. The iPod menu navigating function of remote control will work on most iPhone or iPod models
except for the iPod nano 6th gen.
AUXILIARY INPUT OPERATION
This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3
players, CD players and older, non-dockable iPods (except iPod shuffle 3
rd
gen) and listen to your
external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the AUX-IN jack located on the left side of this Docking System and the other end
of the cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. To enter the AUX function mode, set the FUNCTION selector to
STANDBY/AUX position.
5.
The volume level can now be controlled through the main unit. Operate all other functions on
the auxiliary device as usual.
Note:
(1) If you connected the Line Out Jack of your external device then you only need to adjust the
volume control of this system. If you connected the Headphone Jack of your external
device then you may need to adjust both the volume control of your external device and the
volume control of this system to find the most desirable volume setting.
(2) Remove the audio cable from AUX IN jack when you finish listening. Don't forget to switch
off the power on your external device as well.