Jensen JIMS-70I Clock Radio User Manual


 
7
NOTE:
 When you first dock your iPod/iPhone, the unit will run an authentication
process, so it may not respond immediately to the
SYNC
button when pressed.
Wait for few seconds and try pressing the
SYNC
Button again
 An iPod /iPhone can only sync time up to the nearest minute; it’s possible to
have up to 59 seconds difference between the clock radio and synced
iPod/iPhone.
 The iPod internal clock is automatically updated when sync’d with iTunes. We
recommend you sync the iPod with iTunes prior to docking to JiMS-70i to make
sure you have the current time available.
 The iPhone receives constant updates from the phone service provider, so the
iPhone time will always be current.
 This JiMS-70i SYNC function does not support earlier iPod models, like iPod
mini, iPod 3G, 4G and iPod photo (4G /color display).

The
SYNC
function can only be done when the JiMS-70i power is Off.
Switching to 24 Hour format
1.) With the current time showing, press and hold the SNOOZE/SLEEP/DIMMER
button until “12H” appears and flashes on the Display.
2.) Press the
or buttons to switch to 24 hour format. After a few seconds
the display will resume to show current clock time.
DIMMER Function
With the JiMS-70i in standby mode, press the
SNOOZE/SLEEP/DIMMER
to
change the LED display brightness to High, Medium or Low.
RADIO OPERATIONS
TUNING THE RADIO
1.) Press the
POWER/FUNCTION
button on the main unit to turn on the unit. The unit
will enter iPod mode. IPod is displayed.
2.) Press the FUNCTION button again to select the RADIO mode. The FM station
frequency will be displayed.
3.) Repeatedly press
the
or
buttons until a station is received.
4.)
To automatically search for stations with strong signals, press and hold either
the
or buttons. The tuner will stop on the first strong station signal it
finds. The frequency reading of the tuned station will be displayed and will
revert back to the current time after about 5 seconds.
5.)
Adjust the sound level by pressing the
VOLUME+/ALARM1
or
VOLUME- /ALARM 2 buttons. The Volume Level reading will be displayed
and revert back to the current time after about 5 seconds.
Notes:
 Manual tune to select weaker stations that might be bypassed during the
automatic tuning.
 If the automatic tuning does not stop on the exact frequency of the station, for