Filter
Top Products
E11
SETTING AND OPERATION
AUX IN mode
You can also play non-docking iPods or other MP3/digital audio player on this unit via the AUX IN jack.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or Line out jack of your external
audio device. Plug the other end of the cable into the unit AUX-IN jack located on the back of this unit
2. Switch on the external audio device.
3. Press the FUNTION button repeatedly until the AUX icon appears on the LCD display.
(2) Press the Power button and turn off the unit when you finish listening. Don't forget to switch off the power
of your external device as well.
4. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary
device as usual.
NOTE:
(1) If you connected the Line Out Jack of your external device then you only need to adjust the volume
level of this unit. If connected to the Headphone Jack of your external device then you may need to
adjust both the volume control of your external device and the volume control of this unit to find the most
desirable volume setting.
CARE AND MAINTENANCE
- Do not subject the unit to excessive force, shock, dust or extreme temperature.
- Do not tamper the internal components of the unit.
- Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
- Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or
motors.