Filter
Top Products
8
If the docking port will not be used for an extended period of time, it is recommended to cover the docking
port by using the “Dock Cover” insert (included).
1.Use the iPod adaptor included in your iPod and insert it into the docking area. Your iPod can now be
inserted into the docking port by placing the connector on the bottom of the iPod onto the connector in
the docking bay.
Note: Please be careful when seating the iPod into the docking to avoid damaging
the 30-pin connector on iPod or docking system.
2.Press the POWER On/Off button to switch on the docking system.
®
3.Press the FUNCTION button repeatedly until the indicator “iPod” shows on the display. The iPod will
start playing and charging automatically.
®
4.Select your desired EQ and play mode in your iPod .
5.Press the VOL +/- button on the docking system to adjust your desired volume level
®
NOTE:The volume level cannot be adjusted by the volume control of your iPod after being docked.
®
6.The iPod is charging even during playback.
NOTE: The iPod will only charge in iPod, AUX, or power "OFF" modes.
®
7.To remove the iPod from the unit, press and hold the PLAY/PAUSE button for three seconds to switch
off the device and then gently remove it from the docking connector.
®
You may control the playback of your iPod by:
®
- Press the PLAY/PAUSE button to pause or resume the iPod playback;
- Press the iPod Skip/Search Forward or Backward button to skip to the next or previous song;
- Press and hold the iPod Skip/Search Forward or Backward button for fast-forwarding or
fast-rewinding during playback.
®
iPod DOCKING