Jensen JiMS-182 MP3 Docking Station User Manual


 
9
1. To set the wakeup time, press and hold the ALM.1 / MEM- or ALM.2 / MEM+
Button for approximately 3 seconds until the hour digit blinks.
While the hour digit blinks, press
or button to adjust your desired hour
digit.
Note: For the 12 Hour format, Make sure the Hour is set so that AM or PM is
correctly displayed.
2. Press ALM.1 / MEM- or ALM.2 / MEM+ button to save the
hour setting, the minute digit will blink.
3. While the minute digits blink, press
or button to adjust
your desired minute digit.
4. Press ALM.1 / MEM- or ALM.2 / MEM+ button to save the wakeup setting.
Setting Wakeup Mode
Press ALM.1 / MEM- or ALM.M2 / MEM+ Button repeatedly to select the desired
wake up mode (wake to Alarm, RADIO or iPod) for alarm 1 or alarm 2.
1. Wake to Alarm
- Repeatedly press ALM.1 / MEM- or ALM.2 / MEM+ Button to enter ALARM
mode. “
” or “ ” will appear in the display. Two different rings for Alarm 1
and Alarm 2 will sound when the alarm time is reached.
2. Wake to Radio
- Repeatedly press ALM.1 /MEM- or ALM.2 / MEM+ Button to enter the
RADIO mode, “
” or “ ” will appear in the display.
- Follow the procedure in “TUNER OPERATION” to select your desired radio
station.
- Press the
POWER/STANDBY Button to turn off the unit. The radio will
automatically turn on when the alarm time is reached.
3. Wake to iPod
- Briefly press ALM.1 / MEM- or ALM.2 / MEM+ Button to select iPod mode,
” or “ ” will appear in the display.
- Follow the procedure in “DOCKING YOUR iPOD” to play your iPod.
- Press
POWER/STANDBY Button to turn the unit off. When the alarm
time is reached, the iPod will automatically start playing.
Note:
i. After waking to iPod or Radio alarm, the volume level of the iPod or radio
can be adjusted as needed.
ii. After the alarm is on, the LCD backlight will automatically be set to high.
4. Light
- The light located on the top of the JiMS-182 works with all “Wake to”
settings. The light will begin to light one minute before the alarm time is
reached and will increase to full brightness by the time the alarm time is
reached.