Filter
Top Products
13
iPod DOCKING
If the docking port will not be used for an extended period of time, it is
recommended to cover the docking port by using the “Dock Cover” insert
(included).
1. Use the iPod adaptor included in your iPod and insert it into the docking
area. Your iPod can now be inserted into the docking port by placing the
connector on the bottom of the iPod onto the connector in the docking
bay.
2. Insert your iPod with its Connector faced downward
the Dock connector on the unit.
and directly over
Note: Please be careful when seating the iPod into the docking to
avoid damaging the 30-pin connector on the iPod or in the
docking system.
3. Slide the FUNCTION switch to select iPOD mode. The iPod will
start playing automatically and starts charging immediately.
4. Press the PLAY/PAUSE button to pause or resume iPod playback.
5. Rotate the VOLUME knob on this unit to adjust your desired volume
level.
Note : The Volume level cannot be adjusted by the volume
control of your iPod after being docked.
6. Your iPod is charging even during playback.
Note:The recharge function operates in iPod and AUX mode only.
7. To remove the iPod from the unit, press and hold the PLAY/PAUSE
button for three seconds to switch off the device and then gently
remove it from the docking connector.
iPod playback control:
- Press the PLAY/PAUSE button to pause or resume the iPod
playback;
- Press the iPod Skip/Search Forward or Backward button to skip
to the next or previous song;
- Press and hold the iPod Skip/Search Forward or Backward button
for fast-forwarding or fast-rewinding during playback.