Filter
Top Products
E-6
1. Press and hold the TIME SET BUTTON (#9) for 2 seconds to enter calendar setting mode.
2. Press the BUTTON (#2) or BUTTON (#6) to increase or decrease the Year (digits are
flashing) setting.
3. Press the TIME SET BUTTON (#9) to confirm and cycle through other settings as follow.
Normal Year Month Day 12/24H Hour Min Normal
SETTING UP THE TIME ZONE
There are 7 time zones programmed into your unit:
Zone 1 : Atlantic time
Zone 2 : Eastern time (factory preset)
Zone 3 : Central time
Zone 4 : Mountain time
Zone 5 : Pacific time
Zone 6 : Yukon time
Zone 7 : Hawaiian time
1. In standby mode, press and hold the TIME ZONE BUTTON (#3) until the current time zone
number shows and is flashing.
2. Press the BUTTON (#2) or the BUTTON (#6) to change to the time zone number, 1-7 as
shown above that corresponds to your area.
3. Press the TIME SET BUTTON (#9) to confirm.
DST - DAYLIGHT SAVING TIME
The DST function allows you to add one hour to the current time (in Spring) and subtract an hour
from the current time (in Fall), if DST is observed in your area.
Press and hold DST BUTTON (#2) for 3 seconds to toggle the DST function on and off. A icon
will appear in the top left corner of the display when adding an hour and the icon will go off when
an hour is subtracted.
CALENDAR AND TEMPERATURE DISPLAY
Selecting Calendar and Temperature display in normal time or radio mode:
Press the TEMP BUTTON (#6) to display the ambient indoor temperature momentarily for 5
seconds.
Note: The temperature display is default to display Celsius readings. To display Fahrenheit
readings,press and hold the C/F BUTTON (#6) to change Fahrenheit.
Press the Y-M-D BUTTON (#2) to display the current Year momentarily (5 seconds). While
the Year is displayed, press the Y-M-D BUTTON (#2) again to change to show the current
Month and Date momentarily (5 seconds).
SETTING UP THE ALARMS
Setting up Alarm 1 and Alarm 2 in normal time or radio mode:
1. Press and hold the ALARM SET BUTTON (4) for 2 seconds to enter the alarm set mode.
2. Press the BUTTON (#2) or the BUTTON (#6) to increase or decrease the Hour (digits are
flashing) setting.
3. Press the TIME SET BUTTON (#9) to confirm and cycle through other settings as follow.
Normal ALARM1 Hour ALARM1 Minute Alarm Weekdays ALARM 2 Hour
ALARM 2 Minute Normal
Note for Weekday Alarms:
1 – 7 means alarm will sound from Monday to Sunday.
1 – 6 means alarm will sound from Monday to Saturday only.
1 – 5 means alarm will sound from Monday to Friday only.
Changing the alarm output source: