Filter
Top Products
2
English
3
English
4
3
2
1
Attaching the Snap-on Speaker
Remove the protective cover from the snap-on speaker
(see fig 2)
and attach the
snap-on speaker on the top of the N-Gage QD game deck. The snap-on speaker
attaches to the headset and the charger connector
(see fig 4)
IMPORTANT:
Calls cannot be made or received while the snap-on speaker is attached.
To make a call, remove the snap-on speaker before dialling the number.
To receive a call, remove the snap-on speaker before answering the call.
Using the Snap-on Speaker
To use the Snap-on Speaker turn it on using the ON/OFF switch on the left side of the
speaker. Adjust the volume using the Volume wheel.
Installing and replacing the Battery
Remove the battery cover on the back of the snap-on speaker by pressing the release
button and pushing the cover up. Install or replace the AAA battery and put the cover
back on. (
See fig. 3).
Charging the N-Gage with the snap-on speaker attached
N-Gage QD game deck can be charged while the snap-on speaker is attached. Plug
in the original ACP-12 charger to the socket on the right hand side of the snap-on
speaker while the speaker is attached to the N-Gage QD.
(
See fig. 5).
Note:
The snap-on speaker cannot be charged. Charging the N-Gage QD while the
snap-on speaker is attached does not affect the snap-on speaker battery life.
About your N-Gage QD Snap-on Speaker
GETTING STARTED
The N-Gage QD snap-on speaker will enable you to share game sounds wherever you
are.
1. Volume wheel 4. Protective cover
2. On/off switch 5. Charging socket
3. Speaker grill 6. Release button