Filter
Top Products
9
Insignia NS-CLOPP1 Digital Clock Radio with FM
www.insigniaproducts.com
Setting the alarm sound
Your radio has two alarms and can play the buzzer or the radio for the
alarm sound. You can use the same alarm sound for both alarms or set one
alarm to use the buzzer and the other alarm to use the radio.
To set the alarm sound:
1 Press (Alarm 1) or (Alarm 2). The or icon blinks on
the LCD.
2 To use the radio as the alarm sound, press (Alarm 1) or (Alarm 2)
once. The or icon blinks on the LCD and the alarm sound
is set to the radio. Wait three seconds to save the setting and exit alarm
sound setting mode. When the alarm turns on, the last tuned radio
station plays.
OR
To use the buzzer as the alarm sound, press (Alarm 1) or
(Alarm 2) twice. The or icon blinks on the LCD and
the alarm sound is set to the buzzer. Wait three seconds to save the
setting and exit alarm sound setting mode.
3 To completely turn off the alarm, press (Alarm 1) or (Alarm 2)
repeatedly until the or icon disappears from the LCD.
Setting the alarm time
Your radio has two alarms that you can set for different times.
To set the alarm time:
1 Press and hold (Alarm 1) or (Alarm 2) for about two seconds
until the hour digits blink on the LCD.
2 Press or to increase the hour or press or to decrease the
hour.
3 Press (Alarm 1) or (Alarm 2) again. The minutes digits blink on
the LCD.
Note
Button presses must be within three seconds of each other. If
you do not press a button within three seconds, your radio exits
alarm setting mode.
Notes
• “AM” or “PM” appears on the LCD to the right of the time.
When you set the time, make sure that the “AM” or “PM”
displays correctly.
• Button presses must be within 10 seconds of each other.
If you do not press a button within 10 seconds, your radio
exits alarm setting mode.
1
2
1
2
1
2
1Radio
2Radio
1
2
1
Buzzer
2
Buzzer
1
2
1
2
1
2
1
2