Filter
Top Products
12
Insignia NS-CLOPP1 Digital Clock Radio with FM
www.insigniaproducts.com
Programming a radio station preset
A radio station preset lets you assign a preset number to a radio station to
make it easier to tune to a station. You can program 10 presets.
To program a radio station preset:
1 Tune to the radio station you want to program, then press and hold
Preset for two seconds. The “Preset” icon lights and the next
available preset number (P-01 through P-10) appears in the center of
the LCD.
2 If you want to use a different preset number, press or repeatedly
until the number you want appears on the LCD.
3 Within 10 seconds, press Preset again to save your station preset.
If you do not press Preset within 10 seconds, your radio exits
preset mode and your station preset is not saved.
Tuning to a preset radio station
After you program radio station presets, you can quickly tune to a preset
station.
To tune to a preset radio station:
• Quickly press and release Preset one or more times until the
preset number for the station you want appear in the center of the
LCD. Your radio tunes to the station.
Connecting an audio device
You can connect an audio device, such as an MP3 player, to your radio to
play music through your radio’s speakers.
To connect an audio device:
1 Plug an audio cable with a 3.5 mm connector (not included) into the
AUX IN jack on the back of your radio and into the audio out jack on
your audio device.
2 Press Source to turn on your radio, then press Source
repeatedly until AUX appears on the LCD.
3 Press or to increase or decrease the device volume.
4 Use the controls on the audio device to control playback.