Insignia NS-CL02 Clock Radio User Manual


 
16
I
ns
i
gn
i
a
NS
-
CL02
CD
Cl
oc
k
R
a
di
o
www.insignia-products.com
4 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to set the
minute. Make sure that you set the correct AM/PM setting.
5 Press STOP/BAND/TIME SET again. The clock is set.
To set the alarm:
1 Press and hold ALARM 1 or ALARM 2 (depending on the alarm
mode you want) until the hour blinks.
2 While the hour is blinking, press SKIP+/FF/TUNE UP or SKIP-/
FR/TUNE DOWN to set hour (AM/PM) you want to wake up.
3 Press ALARM 1 or ALARM 2 again. The minutes begin to blink.
4 While the minutes are blinking, press SKIP+/FF/TUNE UP or
SKIP-/FR/TUNE DOWN to set the minute you want to wake up.
Make sure that you set the correct AM/PM setting.
5 Within 10 seconds, press SKIP+/FF/TUNE UP or SKIP-/FR/TUNE
DOWN repeatedly to select CD, RADIO, or BUZZER as the alarm
source. Make sure that the corresponding indicator appears on
the display. If you select RADIO, the frequency of last setting will
display on display
6 Press ALARM 1 or ALARM 2 again to confirm the setting.
7 To turn on the alarm, press ALARM 1 or ALARM 2 in standby
mode.
8 To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm
indicator disappears from the display. The alarm will not come on
until it is reset.
Notes
In Standby mode, press ALARM 1 or ALARM 2 to activate
the alarm. ALARM 1 (or ALARM 2) and BUZZER appear
on the display. Press SKIP+/FF/TUNE UP or SKIP-/FR/
TUNE DOWN to cycle through the alarm options (BUZZER,
CD, RADIO, or OFF).
The alarm automatically changes to BUZZER if the CD
cannot play.
The alarm automatically switches off after 60 minutes if no
key is pressed during the alarm set.