Insignia NS-A2202 Portable DVD Player User Manual


 
28
www.insignia-products.com
Both the player and disc are coded by region. If the region
codes do not match, the disc cannot be played. This player is
coded for Region 1 discs.
Remote control does not work
Remove obstructions between the remote control and the
player.
Point the remote control at the remote control sensor of the
player.
Replace the batteries with new ones.
Disc play starts, then stops immediately
Both the player and disc are coded by region. If the region
codes do not match, the disc cannot be played. This player is
coded for Region 1 discs.
The disc is dirty. Clean it.
Condensation has formed in the player. Let the player dry out,
then try again.
Picture is distorted
Inspect the disc, it might be damaged. Try another disc.
It is normal for some distortion to appear during forward or
reverse scan.
No power
If running on AC power:
Make sure that the plug is correctly inserted in the wall
socket.
Make sure that the AC adapter is inserted to the correct
plug on the DVD player.
Make sure that the wall socket has power (Some wall
sockets are controlled by a switch).
If running on battery power:
Make sure that the battery is secured in place on the back
of the DVD player.
Make sure that the battery is fully charged.
Make sure that the battery and AC adapter are not both
plugged in. If so, disconnect the AC adapter.
Specifications
Laser
Semiconductor laser
Wavelength 650 nm/795 nm
Video system
NTSC
Compatible discs
DVD/DVD+R/DVD+RW/DVD-R/
DVD-RW/CD/CD-R/CD-RW/MP3
NS-A2202 7” portable DVD player