iLive IT209B MP3 Docking Station User Manual


  Open as PDF
of 24
 
5
iPod Only
QUICKSTART
█ POWERTHEBARSPEAKER
1. Connect the bar speaker to AC power source using the attached AC Power Cord.
1. Connect a Stereo RCA Cable to the Audio Outputs on
the television.
2. Connect the other end of the Stereo RCA Cable to the
AuxiliaryStereoInputson the bar speaker.
The volume on your television may need to be
adjusted independently of the bar speaker, or
adjusted to a xed audio mode.
1. Connect an RCA Video Cable to the Video Input on
the television.
2. Connect the other end of the RCA Video Cable to the
VideoOutputon the bar speaker.
1. Connect a Stereo RCA Cable to the Audio Outputs on
the device.
2. Connect the other end of the Stereo RCA Cable to the
AV1R and AV1LStereoInputson the bar speaker.
3. Connect an RCA Video Cable to the Video Output on
the DVD Player.
4. Connect the other end of the RCA Video Cable to
the Video1Input or the Video2Inputon the bar
speaker.
The numbered Video Inputs need to correspond with
the connected Audio Inputs.
The bar speaker itself has no video display. In order
to view video from a connected DVD Player, the bar
speaker must be connected to a television by using
the CompositeVideoOutput.
The S-Video Output will not output video from a
connected DVD Player. The S-Video Output will only
output video from a docked iPod.
CONNECTINGAUDIOFROMATVTOTHE
BARSPEAKER
CONNECTINGVIDEOFROMTHEBAR
SPEAKERTOATV
CONNECTINGADVDPLAYERTOTHEBAR
SPEAKER
SVIDEO 1
SVIDEO 2
VIDEO INPUT
AV 1
AV 2
AUDIO INPUT VIDEO INPUT
R L
AUDIO OUT
AUDIO OUTPUT
R L
AV OUTPUT
AUDIO VIDEO
R L
SVIDEO 1
VIDEO
Diagram of the IT209’s Inputs & Outputs
Diagram of the IT209’s Inputs & Outputs
SPECIALNOTE:
A Digital Cable or Satellite Tuner, Set-Top Box, Gaming Console,
or VCR can be connected to the bar speaker in the same way that
a DVD Player is connected.
Example of DVD Player Outputs
Example of Television Inputs & Outputs
 previous next