Filter
Top Products
RESET
RESET
TEST
TEST
1
iP49 Quick start
To open the iP49, grasp the front lid
of the unit and gently pull upwards
and release into lid rest.
To close, pull lid upwards and gently
press bottom edge towards rear
hinge.
1: Open unit
For this iPhone/iPod
Use this insert
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free
at 1-877-446-6301 to purchase one.
Select the proper insert for your
iPhone or iPod from the table below
and place in dock. Gently place
iPhone/iPod into dock (iPhone/iPod
must not be in a “skin” or case).
iPhone/iPod will charge while
docked. Press the Button on the
iP49 to play your iPhone/iPod.
iPod nano 5G
insert 18
iPod nano 5GiPod Touch 2G
iPod touch 2G
insert 16
iPhone 3G
Insert 15
iPhone 3G/3GS
4: Time
• To use time sync: dock your iPhone/iPod and press the
Button. The unit will sync to the time on your iPhone/iPod.
• To set time manually: move the DST switch on rear of unit to -1 or +1
(subtracts or adds an hour for standard time or daylight saving time).
• Press & hold the Button until the hour display flashes.
Press the / buttons to set the current hour.
• Press the Button. The minute display flashes.
Press the / buttons to set the current minutes.
• Press the Button. The year flashes.
Press the / buttons to set the current year.
• Press the Button. The date flashes.
Press the / buttons to set the current date and day.
• Press the Button to confirm settings.
Attach AC adaptor cable to the DC
jack on back of the iP49 and plug the
other end into a working wall socket
to play and charge iPhone/iPod and
to charge the internal battery.
2: Connect to AC power
pm
radio
wake to
z z z
aux
iPod
iPhone
Prest
3: Dock iPhone/iPod
aux
radioiPodiPhone wake-to
preset