Filter
Top Products
Programming Snooze Time
The default snooze time is 9 minutes. You can adjust the snooze duration. During normal operation
(when alarm is NOT sounding), press and hold the Snooze/Dimmer Button for 2 seconds until the
ZZZ indicator and Snooze time display flashes. Adjust the duration of snooze time up or down
(between 1 - 29 minutes) by pressing the or Buttons. Press and hold the Snooze/Dimmer Button
to confirm.
Using the Snooze/Dimmer Button
1. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and will come
on again after the set snooze duration. You may repeat this cycle several times during the one hour
alarm cycle.
2. During normal operation with the AC adaptor, press the Snooze/Dimmer Button to control the
brightness (high, medium, low and off) of the LCD display. During portable operation with 4 “AA”
batteries, the LCD backlight will display for about 5 seconds when you press the Snooze/Dimmer
Button once.
8
Snooze/Dimmer Operation
iHM45 IB-080113_v5.ai 11 10/14/13 2:07 PM