Filter
Top Products
5
Using the unit
Snooze Operation
1. Default snooze time is 9 minutes. To program a custom snooze time, press and hold the Snooze Button during normal
operation (when alarm is not sounding) until the snooze minutes display appears. Press and release the + or - Button
to set the snooze timer from 1 to 29 minutes. Press and release the Snooze/Dimmer Button to exit snooze setting
mode.
2. Press and release the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze
duration time then sound again. Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The unit has a sure alarm feature. If back-up batteries are installed, the buzzer alarm will still sound in the event of a power
failure.
Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions.
Charging your iPhone/iPod
1. Gently dock your iPhone or iPod. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it
recharges (until fully charged).
Listening to iPhone/iPod
1. Dock the already playing iPhone/iPod in Dock. The unit will automatically turn on and you will hear the music playing
from your iPhone/iPod.
Note: If the playing song volume is too low on the iPhone/iPod, the unit may not detect iPod is in play mode.
Press and release the Button to play it.
2. When an iPhone/iPod is docked and in standby mode, press and release the Button to play it. “iPod” will appear
on the display to indicate iPod playing mode.
3. Press and release the Button again to pause play; press again to resume it.
4. Press and release the + or - Button to skip to the next or previous track on your iPhone/iPod. Press and hold the + or
- Button to search within a track.
5. Press and release the or to adjust the system volume.
6. Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press and release the
+ or - Button to adjust settings .
7. To turn off the unit, press and release the Button. iPhone/iPod will continue charging while docked.
Listening to Radio
Setting up Antenna
Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
For USA user, uncoil AM antenna cable from antenna frame and plug cable into socket on back of unit. Hold base of AM
antenna in one hand and bend the outer frame around towards the base and snap tabs into open slot on base. Move
antenna 12” away from unit for best reception.
Tuning and Playing the Radio
1. Press and release the Mode Button as needed to turn on the unit and cycle through iPod, FM radio, AM radio and
Aux-in modes.
2. When the desired FM or AM mode is selected, press and release the + or - Button to tune the radio to a desired station.
The current radio frequency appears in the lower right of the display. Press and release the + or - Button for a few
seconds to scan for the next clear station.