Filter
Top Products
4
Using the unit
Using the Alarms
This unit has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and
frequencies (daily, weekdays or weekend). Tip: Download the free iHome+Sleep app for advanced alarm, snooze and
sleep functions.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm
you are setting.
1. Press and hold the or Button until the alarm time flashes on the lower part of the display. Press and release the
+ or - Button to set the alarm time (hold for faster setting). Remember to set the correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time, then press and release the + or - Button to
set the alarm schedule (’wake 7 days’ = the whole week, ‘wake weekdays’ = Monday through Friday, ‘wake weekend’
= Saturday and Sunday only).
3. Press and release the Alarm Button again, then press and release the + or - Button to select an alarm source to wake
to: (iPod, Radio, Buzzer, Playlist or App).
For wake to iPod: select iPod to wake to a docked iPhone or iPod. If the unit does not detect an iPhone/iPod at the
set alarm time, the unit will default to buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough
music on your iPhone or iPod to last that long.
For wake to radio: after selecting Radio as wake to source, press and release the Alarm Button and then press and
release the + or - Button to select AM or FM band. Press and release the Alarm Button again and press and release
the + or - Button to select a radio station or press and release the Preset Button to wake to a preset radio station (see
Listening to Radio on page 5 for details on setting radio stations and presets).
For wake to playlist: you must create a playlist named “iHome” in iTunes and have it on your iPod/iPhone. The unit
will play music randomly from within the “iHome” playlist.
For wake to app: you must have the free iHome+Sleep app installed and running on your iPhone or iPod to set custom
app alarms.
4. Press and release the Alarm Button again, then press and release the + or - Button to set the alarm volume.
5. Press and release the Alarm button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm
will be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest
set alarm time.
Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
Alarms are automatically armed when set. Active alarms are indicated by alarm icons on the display.
1. Once an alarm is armed, the lower part of the display will show the alarm time. If more then one alarm is armed, the
earliest alarm time will show.
2. To review the alarm time, press an alarm button once. The related alarm time and wake source will show on the lower
part of the display.
3. During alarm review, press and release the Alarm Button once to toggle it on or off. If the alarm is armed, the related
alarm icon will light up.
Resetting the Alarm to Come on the Next Day
1. When the alarm is sounding, press and release the Button to stop the alarm and reset it to come on the next set
day. For example, if alarm is set for weekdays and you press and release the alarm reset on Friday, the alarm will come
on again on Monday, not Saturday.
TIP: When the iHome+Sleep app is running, press and release the (wakeup) button to access wake profiles. When
the app is not running, you can press and release the wakeup button to shut off the unit and reset the alarm to come on
at the set time.