Filter
Top Products
Using the iA100
5
Connecting the iA100 to Power Source
Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC cord of the AC adaptor
into the wall outlet.
Turning the iA100 ON or OFF
Press the Power/App Button on the iA100 at any time to turn the iA100 On or Off. Note that a docked iPad, iPhone or
iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged in. iPod Classic (1G and 2G)
will not charge.
Time Sync
The iA100 clock is preset to U.S. Eastern Standard Time.
The iA100 Time Sync feature allows you to sync the time setting on the iA100 to the time from your iPad, iPhone or recent
model iPod (iPod touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature).
1. Press the Clock Button located at the back of the unit, “Time Sync” flashes on the lower part of the display.
2. Once sync is completed, “Time Updated” will appear on the display.
3. If sync was not successful, “Sync Failed” will appear on the display. If this happens, please try again, with a different
iPad/iPhone/iPod if needed. If sync still fails, please see Setting Time and Calendar below to set the clock.
NOTE: iPhone time is automatically updated to the correct time via cell phone towers. The time on your iPad or iPod is
accurate only to the time on the computer the last time the iPad or iPod was synced to it. It’s possible to have up to 59
seconds difference between the iA100 and synced iPhone/iPod.
Setting Time and Calendar Manually
1. Press and hold the Clock Button located on the back of the unit until the time display flashes.
2. Press the or Button to adjust the time (hold for a few seconds to advance or reverse rapidly). Remember to set
the correct AM or PM hour. An icon in the upper left hand corner of the time display indicates AM or PM
3. Press the Clock Button again. The year will flash in the lower part of the display. Press the or Button until the
current year is displayed.
4. Press the Clock Button again. The month and date will flash. Press the or Button until the current month and
date is displayed. Hold to advance rapidly.
5. Press the Clock Button once more. Two beeps will sound to confirm your settings and you will exit Time and Calendar
Setting mode.