Filter
Top Products
Replacing Clock Backup Batteries
Battery Warning
10
Dimmer Operation
During normal operation, press the Snooze Button to control the brightness of the LCD display.
The iA100 comes with 2 x AA backup batteries installed to provide backup alarm
operation and clock settings in the event of a power failure. When the battery low
indicator appears on the diisplay, it’s time to replace the batteries.When the
Backup Batteries have been installed and a power failure occurs or the AC cord
is accidentally disconnected, the display backlight will not remain lit, but current
time and alarm time settings will be temporarily maintained. Otherwise, you must
reset the time and alarm settings.
1. Open backup battery compartment door located on the bottom of the unit.
2. Please make sure the AC adaptor is connected. Otherwise all settings may be
lost during battery replacement.
3. Insert 2 AA batteries, checking that the polarity (+ and – ends of the battery)
matches the drawing near the battery compartment. Close the compartment
door.
Note: Make sure you dispose of batteries properly (see your local regulations).
Replacing Backup Batteries
ᕢ
ᕡ
ᕣ
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards