IBM 385 (2635) Clock Radio User Manual


 
Diagnostic Error Codes
If an error is detected, the following appears:
Large X on the left side of the device icon.
Device ID (three digit)
Error code (two digit)
FRU code (four digit)
Exit
OK
x
Restart
Start
DEV 001
ERR 0010
FRU 02
SystemBoard Memory Display
HDD-1 FDD-1
Parallel
PCMCIA-1
111
PCMCIA-2FDD-2
2
2
2
HDD-3
3
CDROM-2
1
HDD-2
2
Serial CDROM-1DSP AudioInfrared
The device ID and error code are used to indicate the
detail portion of the FRU which caused the error. If
replacing a FRU does not correct the problem, see the
device ID or error code from the previous failure. If they
have changed, the cause might be because the new FRU
is detective or that the FRU was incorrectly installed.
Device ID: If an error is detected by the diagnostic
tests, a three digits device ID is displayed. The device ID
indicates suspected device.
Icon Device
ID
Suspected Device
SystemBoard
001 System Board
003 Keyboard
007 Math Coprocessor
086 Pointing Device
Memory
002 Memory
Display
050 Display
051 Enhanced Video
052 MPEG
HDD-1
1
017 Hard Disk Drive
568 IBM Mobile Systems - ThinkPad HMM Volume 3