Filter
Top Products
10 11
7. Press and hold SEEK/TRACK (Fig. 1) to scan backward quickly
through a track; press and hold SEEK/TRACK (Fig. 1) to scan
forward quickly through a track.
8. Press PLAY/PAUSE (Fig. 1) to pause a playing CD. Press
PLAY/PAUSE (Fig. 1) again to resume play.
9. Press STOP (Fig. 1) to stop a CD.
10.To remove disc press CD OPEN to open the compartment door
Using The Auto-Timer
When the power is on and you are listening to a nature sound, CD, or
radio you may set a timer so the unit will automatically turn off.
1. Toggle through the TIMER button (Fig. 1) until the time of your choice
is displayed. 15, 30, or 60 minutes.
2. To cancel the timer, toggle through the TIMER button until you reach
the off position, or press POWER (Fig. 1).
Note: The TIMER ICON (Fig. 2) will disappear after 10 seconds.
Setting And Using The Alarm
1. Press the ALARM SET button (Fig. 1). The time will flash.
2. While the time is flashing press the HOUR button (Fig. 1) until you reach
the correct hour. Then press the MIN button (Fig. 1) until you reach the
desired minute.
3. After 5-10 seconds the alarm set time will stop flashing and it will be
programmed, or you may press the ALARM SET button to confirm.
Note: The PM indicator (Fig. 2) also applies to the alarm. You can
review the alarm setting anytime by pressing the ALARM SET button.
4. To activate the alarm you may choose one of 4 wake options:
a. To wake to RADIO press the ALARM MODE (Fig. 1) button once.
b. To wake to sounds press the ALARM MODE (Fig. 1) button twice.
It will set to the last sound you listened to. If you wish to choose
a different sound toggle through the SOUND (Fig. 1) button.
c. To wake to BUZZER press the ALARM MODE (Fig. 1) button three times.
d. To wake to CD press the ALARM MODE (Fig. 1) button four times.
Note: The chosen alarm mode icon (Fig. 2) will display to indicate
that the alarm is set.
SS-6000_6 7/15/05 8:43 AM Page 11