Filter
Top Products
54
ADVANCED SETTINGS
Your HITACHI Projection TV has an Ultra AI (Artificial Intelligence) function which will automatically
adjust picture settings to produce the highest quality picture possible.
When AI is highlighted, press down on THUMB STICK to turn the AI on or off.
Use the THUMB STICK
or to select function.
Press down on THUMB STICK to select the function setting. When the function has an "ü" in the box,
it is ON.
Use THUMB STICK
to change COLOR TEMPERATURE or ASPECT RATIO setting. When the
function shows a "
", it is selected.
Use THUMB STICK
to enter V. POSITION mode, than use THUMB STICK or to adjust V.
POSITION.
Press EXIT to quit menu or THUMB STICK
to return to previous menu.
ULTRA AI (ARTIFICIAL INTELLIGENCE)
When the AI function is on, the TV's internal computer will perform the following:
1. Automatically monitor and adjust contrast depending on room lighting (sensor is located in the front
panel) to produce a more natural picture.
2. Automatically monitor and adjust color levels and maintain natural flesh tones.
3. Automatically compensate for weak or strong TV signals to produce a clear picture.
Turn the AI function off to control other PREFERENCE SETTINGS.
AUTO COLOR
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels
even after a program or channel changes. It also maintains natural flesh tones while preserving fidelity of
background colors. (This function will automatically set to ON and cannot be turned off when the ULTRA
AI function is ON.) This function does not operate with a COMPONENT: Y-PB-PR input signal.
NOISE REDUCTION
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
degrading picture quality. (This function will automatically set to on and cannot be turned off when the
ULTRA AI function is ON.)
COLOR TEMPERATURE
Set this to WARM for hotter colors with more red, or set to COOL for less intense colors with more blue.
ASPECT RATIO
Adjust this when viewing a COMPONENT: Y-PB-PR input signal.
16:9 - Screen changes to 16:9 aspect ratio. (gray bars visible on top and bottom of screen). HDTV signals
are normally 16:9 aspect ratio.
4:3 - Screen changes to 4:3 aspect ratio. (entire screen is filled with video). SDTV and NTSC signals are
normally 4:3 aspect ratio.
V. POSITION
Adjust this when viewing a COMPONENT: Y-PB-PR signal. This feature is used to center an HDTV
video signal between the top and bottom gray bars. Adjustable range is -10 (video center is toward bottom
of screen) to +10 (video center is toward top of screen).