Filter
Top Products
Features
● 2GB memory capacity
● MP3 / WMA Player
● Works as a memory storage device (USB flash drive)
Connecting with the Computer
System requirements
Your computer system must meet the following specifications:
• Pentium 200MHz or above
• Microsoft Windows 2000/ME/XP/Vista, Mac OS 10.3+
• 120MB of available hard disk space
• USB port supported
Connecting the player to computer
Before connecting the player, make sure your computer is powered on.
1. Insert the USB cable provided into the player and computer.
2. For Windows, the computer system detects “New hardware” and starts to install the driver
automatically. Wait for the system to finish the installation. When it has finished, a new
“Removable Disk” will be created in “My Computer”. For Mac, the computer will detect the
player as a “NO Name” drive.
Loading files to the player
To download the files from your computer, perform the following steps.
1. Open Windows Explorer or My computer. “Removable Disk” will be displayed.
2. Select the files on your computer and simply move it into the “Removable Disk” in the
usual way (drag-and-drop or copy-and-paste). After copying is completed, the data will
be available on the MP3 player.
Note:
• Do not disconnect the player during loading. It may cause malfunction of the player
and the files.
Disconnecting the player
After completing the file transfer, safely disconnect the MP3 player.
1. Double click the green arrow “Safety Remove Hardware” in the taskbar on the bottom
right of the window.
2. Select “USB Device” and click “Stop”.
3. When the “Stop a Hardware device” appears, click “OK” to disconnect the USB mass
storage device. Then you can unplug the player safely.
Mass Storage
The MP3 player can be used to store any type of file as a USB flash drive. It can, for example,
be used to simply transfer files from one computer to another or as a back-up device.