Filter
Top Products
To power up the storage enclosure:
1. Complete server hardware installation and cabling. See
the server documentation.
2. Connect the SAS cables and power cords to the enclosure.
See “Choosing a configuration” on this poster.
3. Press and hold the Power On/Standby button. Wait and
observe the system power LED and fan modules. When the
enclosure powers up, the system power LED illuminates
solid green and the fans spin to a high speed, and then
spin down to a low speed.
4. Power up the servers. See the server documentation.
7-segment display board
When the MSA70 is connected to the host controller, the
controller automatically assigns the port and box ID numbers to
the enclosure. The 7–segment display board allows you to
identify the port and box ID number assigned to the MSA70.
See the user guide for more information.
• Press the up arrow key to view the port that the MSA70 is
connected to.
• Press the up down arrow key to view the box ID number.
NOTE: You can also view the port and box ID numbers within
ACU, HP SIM, and ADU.
Updating firmware
After installing hardware and powering up the enclosure for the
first time, be sure to verify that the host controller, the enclosure,
and hard drives have the latest firmware. You can identify
which firmware versions you have for the host controller, the
MSA70, and the installed hard drives through HP SIM and
ACU. ADU allows you to view the firmware versions for the host
controller and hard drives, but not the MSA70.
NOTE: The firmware for both SAS and SATA hard drives is
upgradeable.
For firmware and software updates, see the HP website:
http://h18004.www1.hp.com/support/files/storage/us/index.
html. You can also update the firmware on the server, controller,
enclosure, and hard drives using Smart Components. See
“Smart Components for ROM Flash” in the user guide.
Additional information
For more information about this product, see the HP
StorageWorks Modular Smart Array 70 Storage Enclosure user
guide on the Documentation CD.
To receive proactive support alerts (such as Customer
Advisories), as well as updates on drivers, software, firmware,
and customer replaceable components, proactively via e-mail
through HP Subscriber's Choice. Sign up for Subscriber's
Choice at:
http://www.hp.com/go/myadvisory
.