Filter
Top Products
ENGLISH
9
CONNECTION/PREPARATION
----------------------------------------------------------
Power supply
The player operates with the integrated lithium-polymer battery 1 x 3.7 V,
310 mA.
Battery connector
A battery connector is plugged into the earphone jack »
0
« of the player when
supplied. This separates the battery from the circuit and prevents the battery from
deep discharge.
1 Before charging, unplug the battery connector and store it in a safe place.
Note:
The pins on the connector are very sharp. There is a risk of injury. Keep the
connector out of the reach of children.
2 If you do not intend to use the player for some time, plug the connector into
the earphone jack »
0
«.
Note:
The player must be switched off. Never plug the connector into the player
when it is switched on.
Charging the battery
Charge the battery for the player on a computer.
You can also charge the battery by connecting it to a USB-compatible hi-fi
system using a USB cable.
Note:
When charging with a standard USB adapter, the player is still ready for
operation.
1 Connect the USB socket on the player to the USB socket on the computer,
charger or hi-fi system using the USB cable.
2 Switch on the computer or hi-fi or connect the charger to the power supply.
– The display indicates the charging procedure. The charging time is
approximately four hours. »
P
« appears in the display when the battery
is fully charged.
Notes:
The display of the player tells you about the state of the battery. » « in the
display indicates that the battery is running low.
The playing time of the device with batteries is up to seven hours in audio
mode and up to four hours in video mode.
Note:
There is a risk of explosion if the battery is not replaced properly. Only use
the same type of battery or an equivalent.
Note:
If you do not intend to use the player for some time, please ensure that you
insert the battery protection plug into the headphone jack. This prevents deep
discharge of the battery.
Ä