Filter
Top Products
TO USE THE DOCK WITH YOUR IPOD
1. Remove the iPod cover from the unit.
2. Install the iPod Dock Adapter into Dock, then put your iPod in the Dock on the unit.
(Use proper adapter for your particular iPod model. Some adapters are included with
iPods at time of purchase they will fit properly into the docking station of this system.)
1) After placing the iPod in the Dock,
iPod functions can be operated by remote control,please don’t try to use
the iPod controls because the iPod connector may be
damaged while the dock is connected with your iPod.
2) The iPod battery is still charging when the unit is in
standby mode.
3) This
player can support following iPods
A.Third Generation iPod
B.Fourth Generation iPod
C.Fifth Generation iPod Video
D.iPod Photo
E.iPod Mini
F .iPod Nano (First Generation)
G.iPod Nano (Second Generaton)
H.iPod video
3. Playing music
1) Place iPod in the Dock.as show
on the right.
2) Use the remote controller to play iPod with following steps.
Dock adapter
Connector well
You can remove the Dock adapter
with your fingernail by using this slot
Enter main menu
The top and bottom choose
To choose an item
Play or pause a song.
Change the volume
Skip to the next song.
Start a song over or play the
previous song.
To go back to the previous
menu
Press the MENU button on remote control.
Press the PRE-/PRE+ button on remote control
or main unit.
Press the ENTER button on remote control
Press the play/pause ( ) button on remote control or main unit.
Press the “VOL+” or “VOL- “ button on remote control or main unit.
Press the next/fast-forward ( ) button on remote control or main unit.
Press
the previous/rewind ( ) button once to start a song over,
press it twice to play the previous song. on remote control or main unit.
Press the MENU button on remote control.
iPod PLAYER
7