Filter
Top Products
17
Firmware Update
This setting performs the firmware update procedure by reading the firmware binary files
located in the “Firmware” directory of you device.
Never delete or rename this folder.
Provided that you have already copied to this directory the latest firmware files downloaded
from the official site of your vendor, press enter to start the process. From the menu, you can
verify the revision number of the installed version and the revision of the new release.
The firmware update procedure takes approximately 1 minute. Once completed, turn off your
device by removing the power supply. Wait a few seconds and connect the power supply
again. The new firmware is now saved and in use.
NOTE: NEVER TURN OFF TVISTO DURING THE FIRMWARE UPDATE PROCEDURE.
THIS MAY DAMAGE YOUR DEVICE. IF FOR ANY REASON (E.G. POWER SUPPLY
FAILURE DURING FIRMWARE UPDATE) THE PROCEDURE FAILS, YOU MAY NOT BE
ABLE TO OPERATE YOUR DEVICE. IN THIS CASE, YOUR DEVICE MAY BE REPLACED
WITH A FUNCTIONAL UNIT BY YOUR VENDOR.
To return to factory default settings press successively: INFO, 0, 1, 2, RETURN