Filter
Top Products
7.6 SLEEP Function:
The sleep function allows the user to listen to the radio before going to sleep
secure in the knowledge that the radio will turn itself off after a given period
of time. The given period of time is chosen by the user.
USING THE SLEEP FUNCTION DOES NOT AFFECT THE ALARM SETTINGS
To set the number of minutes before the radio ‘sleeps’:
• Press ‘SLEEP’
• Use the LEFT/RIGHT ARROW keys to select the number of minutes until you
wish the radio to ‘sleep’
• Press SELECT
• The message ‘Sleep Activated’ will appear on the display
• The radio will ‘sleep’ (go into standby state) after the corresponding number
of minutes
8 Performing a RESET
To restore the GEO-1 to its factory settings press and hold down the MENU
button for two seconds.
A message will appear on the screen asking you for confirmation. Press the
SELECT button to continue or allow the radio to return to the previous state.
NB a system reset will delete all presets, menu option selections and
alarm/clock settings. A system reset should only be performed if this
is required or if the unit appears to have developed an operational
fault
Page 13/14