Filter
Top Products
• Then using the LEFT/RIGHT arrow keys select either a DAB radio alert or
Buzzer alert. PRESS SELECT to confirm choice.
• The screen will then summarise and confirm your settings
• The GEO-1 will then return automatically to radio mode
• Follow above steps to pre-program all 4 alarms
7.3 To enable or disable a PRESET ALARM:
CAN BE DONE IN STANDBY MODE OR WHEN THE RADIO IS TURNED ON
• Press the ALARM button.
• Use the LEFT/RIGHT Arrow Keys to select a pre-programmed alarm.
• Pressing the SELECT key repeatedly will enable OR disable the displayed
alarm. THE ALARM IS ENABLED WHEN THE ‘BELL’ SYMBOL APPEARS ON THE
DISPLAY
• Having enabled or Disabled the alarm the GEO-1 will automatically return to
its previous state (radio – if the device was turned on; time and date – if the
device was in standby mode). THE BELL SYMBOL WILL REMAIN ON THE
DISPLAY IF AN ALARM HAS BEEN ENABLED.
7.4 To turn an ALARM OFF:
• Press the ALARM button
7.5 SNOOZE Function:
It is possible to choose the duration of ‘Snooze’ time. Snooze – is defined as a
way of silencing an alarm alert for a given number of minutes from 5 minutes
to 60 minutes (1 hour). Once the number of minutes has been set – pressing
the SNOOZE button will silence any alarm alert for the corresponding number
of minutes:
• When the GEO-1 is switched on, press the MENU button
• Use the LEFT/RIGHT ARROW keys to select ‘Clock’. Press SELECT.
• Use the LEFT/RIGHT ARROW keys to select ‘Snooze’. Press SELECT
• Use the LEFT/RIGHT ARROW keys to select number of minutes. To confirm
press SELECT
Page 12/14