Filter
Top Products
3
INTRODUCTION
Congratulations and a thank-you for the purchase of this Genelec 8200 Series DSP Loudspeaker. These
systems are designed to integrate easily into the digital production environment. There are several ways
to configure and operate the DSP loudspeakers for a wide variety of high quality audio applications. The
loudspeakers also have analog inputs, making them versatile and intelligent replacements for analog
loudspeakers.
This manual addresses setting up and using the 8240A and 8250A DSP loudspeakers in stand-alone
mode without the Genelec Loudspeaker Manager GLM™ and the proprietary Genelec loudspeaker
control network. Use with the GLM™ is described in the DSP System Operating Manual.
EC Declaration Of Conformity
This is to certify that Genelec 8240A and 8250A DSP loudspeakers conform to the following standards:
Safety: EN 60065: 2002 / IEC 60065:2001 7th Edition
EMC: EN 55020 : 2002 + A1 : 2003, EN 55013: (2001), EN 61000-3-2 (2000) and EN 61000-3-3 (1995)
The products herewith comply with the requirements of The Low Voltage Directive 73/23/EEC, EMC
Directive 89/336/EEC and 93/68/EEC
Signed:
Ilpo Martikainen
Position: Chairman of the Board
Date: 20-February-2006
Compliance to FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against