Filter
Top Products
22
Chapter 2: Using Your Player
www.gateway.com
Settings
■
Equalizer: Selects the Equalizer mode. You can
choose Normal, Rock, Jazz, Classical, or Pop.
■
Play mode: Selects the Play mode for music files. You
can choose Normal, Repeat Track, Repeat All, Shuffle,
or Shuffle Repeat.
■
Contrast: Adjusts a contrast level for the display panel.
■
Power Saving: When your player is not being used,
it can automatically enter standby mode to save battery
power. Select the amount of time you want your player
to wait before entering standby mode.
■
Record Settings:
Source selects Microphone or FM so you can
change the settings for recordings from the
microphone or from the radio.
Encoder selects PCM, IM ADPCM, or MS ADPCM.
This setting affects sampling rate of a recording.
ADPCM allows smaller, lower-quality audio files
than PCM. Unless you have special sampling rate
requirements, we recommend you use the default
setting.
Channel changes from stereo to mono if the
Source is FM. If the source is Microphone, you can
only record in mono.
1 hour with 9.5 Mpbs bit rate. MPEG2 encoding.
NTSC–720 × 480, PAL/SECAM–720 × 576d
quality.
■
Backlight: Turns the backlight on the display panel on
and off.
■
Exit: Returns to the main menu.
Erase Files
■
Music: Deletes music files stored in memory.
■
Voice: Deletes voice files stored in memory.
■
Exit: Returns to the main menu.
About Displays the total memory and current firmware version.
Exit Select this option to close the menu.
Options Description