Filter
Top Products
10
Freecom MediaPlayer Drive-In
GB
2
Chapter 2: Assembling a Hard Drive into the
MediaPlayer
This chapter describes how to assemble or disassemble a hard drive to/from the
player.
Note: The HDD should be jumpered as "Master".
Pull a hasp to the arrow direction. Pull another hasp to the arrow
direction.
Grip the hasp and pull it out to the
arrow direction.
Open the top-cover and unscrew the
PCB.
Pull the PCB out. Grip HDD and insert it into the pins
of PCB (be sure to match the 44 pins).
Screwing HDD on PCB solidly by
using the supplied screws.
Insert the screwed HDD & PCB into a
case of Freecom MediaPlayer-25
Drive-In Kit.
Screw HDD & PCB on the Freecom
MediaPlayer-25 Drive-In Kit by using
a screw driver.
Put the back panel in. Push each hasp to the arrow
direction.
Now the assambly is compleated.